Polyester Antistatic Dust Filter Bag (Conductive Fiber)

Ultrafine fiber and medium-denier fiber are selected for gradient composite needle punching. After post-processing of singeing, calendering and laminating, the surface is smooth and flat, which can effectively reduce the adhesion of dust on the surface of the filter bag. When the dust collector is blown and cleaned, it is easy to remove the surface dust, which increases the cleaning effect and improves the dust removal and cleaning effect.

★Product features and technical parameters:

★Introduction to polyester fiber:

Polyester fiber (polyester) is widely used in the field of environmental protection, especially polyester filter needle felt, which is the main filter material used in bag dust collectors. The characteristics of polyester fiber are: good performance at room temperature, can work continuously under 130 degrees working conditions, good elastic recovery, strength of 3.52~5.28CN/dtex, elongation at break of 30%~40%, better wear resistance and heat resistance than nylon, higher strength, slightly discolored after heating in 150 degrees air for 1000 hours, strength reduction does not exceed 50%, acid and weak alkali resistance, stable chemical properties, polyester fiber is a thermoplastic fiber, can be calendered and singed, but polyester is not resistant to strong alkali and is easily hydrolyzed.

★Company Introduction

Jiangsu Mingjing Cloth Industry Co., Ltd. was founded in the 1980s. The company is currently located in Fucheng Industrial Park, Funing County, Jiangsu Province. It is mainly engaged in the research and development and production of industrial filter materials such as dust removal cloth, industrial filter cloth, geotextile, etc. It is one of the country's large-scale filter material manufacturers.
The company has complete production and inspection equipment, many years of production experience and accumulated customer resources, forming a large-scale, intensive, and resource-based benign production mechanism. Provide a variety of high-quality normal temperature, medium temperature, high temperature and other filter material products for bag dust collector manufacturers and bag dust collector environmental protection equipment users. The company's main products are: Metas, Fluoromes, Fangster, PPS, P84, high-temperature glass fiber needle felt, etc. The products are widely used in steel, cement, power generation, metallurgy, chemical industry, grain and other industries.

★Factory Appearance

★FAQ

Q. How to clean and maintain polyester dust filter bags?
A. Cleaning and maintenance of polyester dust filter bags are essential to extend their service life. Here are some common maintenance measures:
Regular dust cleaning: Use pulse jet, back-blowing or vibration to remove dust from the surface of the filter bag to prevent clogging.
Avoid excessive dust accumulation: Check the cleaning effect regularly to avoid excessive dust accumulation affecting the filtration effect.
Check the filter bag: Check the surface of the filter bag regularly for damage or aging, and replace the damaged filter bag in time.
Maintain a dry environment: Avoid moisture in the environment from affecting the filter bag material and causing performance degradation.
Q. What is the role of the anti-static function?
A. The anti-static function can effectively avoid the accumulation of static electricity between dust and the surface of the filter bag during the dust removal process. This not only helps to improve the filtration efficiency, but also reduces the risk of fire or explosion caused by static electricity, especially for flammable and explosive dust.
Q. What is a normal temperature dust filter bag?
A. Normal temperature dust filter bags are mainly used in industrial environments with low temperatures, and the operating temperature usually does not exceed 150°C. They are used to filter dust and particulate matter from the air and are commonly used in cement plants, steel mills, mechanical processing, food processing and other industries.